Careers at IMRA America

Electronics Engineer

Job Functions:

Responsible for system level and board level analog/digital hardware design and software development projects for control of IMRA laser products..
System engineering and integration of electronics with optical and mechanical subsystems.
Determine user interface and safety requirements according to customer inputs and applicable national and international standards for functional safety, electrical safety, laser safety, and EMI/EMC.
Perform design, simulation, and test of analog/digital circuit and software functions.
Generate, revise, update, and document existing hardware/software configurations, including troubleshooting, repair, and improving of system functionality.
Work with vendors and suppliers on custom quotations and to resolve delivery or performance issues.
Coordinate with the Quality Department on safety and regulatory requirements, testing, and certification.
Support manufacturing, transfer designs from development to production and diagnose manufacturing problems.

Qualifications:

BSEE/MSEE with 3-5+ years’ relevant experience. Recent PhD graduate with strong educational performance will be considered.
Experience interfacing analog circuits and digital peripherals with embedded micro-controllers.
Experience with analog, mixed signal and closed loop designs using op-amps, DACs, ADCs and passive components, operating in a frequency range from DC to 1 GHz.
Experience in PCB design using tools such as Altium or Eagle.
Experience with programming of embedded microprocessors in C required.
FPGA programming skills in Verilog preferred.
Experience in optics/electro-optics is a definite plus.
Good written/verbal communication and project documentation skills.

For consideration, please submit the following including a resume and cover letter with salary history or requirements.

Career Name
Name*
名姓
Email*
Phone*
Cover Letter*
Resume*

Inspection/Calibration Specialist

Job Functions:

Clean and inspect incoming parts.
Calibrate equipment for the production group.
Maintain quality inspection and calibration records.
Contact suppliers for calibrated devices.
Purchase order management.

Qualifications:

Basic computer skills.
Proficiency in MS Office (Word & Excel).
Ability to interpret drawings.
Mechanical aptitude & understanding.
Experience in using mechanical measurement and optical inspection tools.
Demonstrated solid employment history.
Applied physics or optics knowledge a plus.

For consideration, please submit the following including a resume and cover letter with salary history or requirements.

Career Name
Name*
名姓
Email*
Phone*
Cover Letter*
Resume*

Smart Laser Researcher

Job Functions:

Designing and development of non-fiber, high-energy ultrafast laser and amplifier.
Exploratory research on innovative ultrafast lasers.
Report and documentation of R&D results.
Writing for patent application as needed.
Writing and presenting on research outcome for publication as needed.

Qualifications:

Ph.D. in laser physics, physics, optics, electronic engineering, or other laser-related major.
Expertise in building ultrafast lasers, including optical & mechanical designing.
Solid technical background on blue-UV laser optics or SLAB laser optics.
Skilled in 3D CAD software is preferred.
Skilled in optical design software is preferred.

For consideration, please submit the following including a resume and cover letter with salary history or requirements.

Career Name
Name*
名姓
Email*
Phone*
Cover Letter*
Resume*

Nanobiotechnology Product Development Engineer

Job Functions:

Develop biologically functionalized colloidal nanoparticles.
Validate product performance in bioassays.
Develop production SOP and implement quality control measures.
Documentation of research results.
Participation in product marketing activities.

Qualifications:

BS or MS degree in chemistry, biochemistry, materials science, or related fields.
Hands-on experience in nanoparticle synthesis and characterization.
Proficient knowledge of surface chemical functionalization and biomolecule conjugation.
Experience in immunoassay and/or cell biology will be considered a plus.
Experience in quality control will be considered a plus.
Excellent communication skills.

For consideration, please submit the following including a resume and cover letter with salary history or requirements.

Career Name
Name*
名姓
Email*
Phone*
Cover Letter*
Resume*

Product Engineer

Job Functions:

Engineering for production of IMRA femtosecond fiber lasers.
Prototyping new laser products.
Establish and improve assembly procedures.
Occasionally involved directly in laser production.
Troubleshoot build and process issues in production.
Improve design of products for manufacturability.
Optical and mechanical test of assemblies, as well as the complete product.

Qualifications:

BSc in engineering or science.
Hands-on knowledge of optics.
Experience with optical measurement equipment.
Industrial experience is preferred.
Knowledge of Microsoft Office (Excel, Word, PowerPoint).
Familiarity with mechanical or optical CAD tools (Inventor, Zemax) a definite plus.
Capable of working in a team environment.

For consideration, please submit the following including a resume and cover letter with salary history or requirements.

Career Name
Name*
名姓
Email*
Phone*
Cover Letter*
Resume*

CAD Drafter

Job Functions:

Use 3D CAD to perform mechanical drawings including simple component parts and complex system parts.
Works with engineers in development as well as in production.
Draw part and assembly drawings derived from existing CAD 3D models or other engineering documentation.
Update, maintain and revise drawings and documents.
Make documents such as a bill of materials and manufacturing-related documents.
Update, maintain and revise drawings and documents.

Qualifications:

Minimum of an Associate’s degree in engineering or related technical field.
3+ years of hands-on experience with 3D CAD drafting of precision parts.
Ability to productively use Autodesk CAD tools such as Inventor and Vault.
Able to perform accurate drawings.
Good understanding of basic GD&T limits and fits.
Good communication skills.
Ability to meet deadlines.
Skilled in MS office.
Ability to work with engineers and correct drawings.

For consideration, please submit the following including a resume and cover letter with salary history or requirements.

Career Name
Name*
名姓
Email*
Phone*
Cover Letter*
Resume*

Laser Application Researcher

Job Functions:

Develops femtosecond laser applications technologies.
Find proper laser process recipes for potential customers.
Tests laser prototypes for material process and feedback to laser developers.
Develops laser processing devices and key processing machine functions.
Work with sales and marketing for business development.
Supports sales and marketing for business exhibitions.
Develops the capabilities of Application Development Center while working in a team.
Technically represents laser processing technology externally working with applications and business development manager.

Qualifications:

Ph.D. in engineering or science (MSc is applicable based on the experiences).
Minimum 3 years of industrial experience in laser material processes and/or laser machining development.
Knowledgeable in laser optics and sciences of laser material interaction.
Experience in operating devices necessary for laser material processing.
Knowledgeable in machine operation language and Labview programming.
Hands-on experience with machine shop tools and simple electronics.
Proven communication skills in a business environment.
Strong people and project management skills, including time management, prioritization, and problem-solving skills.
Proven capability to be personable and to effectively communicate and present concept and technical data to prospective customers and internal personnel.

For consideration, please submit the following including a resume and cover letter with salary history or requirements.

Career Name
Name*
名姓
Email*
Phone*
Cover Letter*
Resume*

Electronics Technician

Job Functions:

Under direct supervision, assembles products and their components and sub-systems, including those that are extremely fragile.
Uses various tools and equipment to assemble and test products and their components and subsystems.
Maintains inventory of products and their components and sub-systems.
Makes minor adjustments to the assembly workstation and offers feedback on major adjustments.
Recognizes anomalous results and notifies others.
Documents work according to existing documentation schemes.
Maintains inventory of supplies.
Maintains and periodically calibrates equipment.
May assume responsibility for oversight of a production workstation, including supplies, maintenance and housekeeping.

Qualifications

Associate’s degree in electronics engineering or related field, plus one to two years’ experience electronics assembly, electrical assembly or high school diploma plus three to five years of experience.
Experience in soldering and wire crimping manufacturing and general assembly
Electrical and electronic measurement techniques i.e. Oscilloscope, mustimeters etc.
Experience working with ESD sensitive devices, cable harnesses, inspection, laser and optical sources
Experience working in an EPA (electrostatic protected area) with ESD’s (electrostatic sensitive devices).
Good manual dexterity.
Quality conscious, attention to detail. Experience of working in an IPC and ISO standard workplace.

For consideration, please submit the following including a resume and cover letter with salary history or requirements.

Career Name
Name*
名姓
Email*
Phone*
Cover Letter*
Resume*

Laser Applications Research Technician

Job Functions:

Conduct laser processing experiments with motion generally based on computer-controlled linear translation stages or galvanometer-based mirror scanners.
Document processing parameters and results of laser processing experiments using various analytical tools (optical microscope, SEM, optical surface profiler, etc.).
Work together with Laser Applications Research Engineer to evaluate all results.
Setup and/or make modifications to the laser processing workstation in the lab. This includes optics, optomechanics, electronics and computer control. Document all design changes.
Monitor performance of the laser (average power, pulse duration, beam quality, etc.). Maintain a log of performance data.
Keep the labs neat and organized. Track lab consumables in order to maintain stock and not run out.

Qualifications:

BS degree in engineering or science discipline
Up to 2 years related experience, including extensive hands-on optical lab experience.
Familiarity with general optics principles, as used for beam alignment and focusing.
Demonstrated the ability to measure performance parameters of lasers in a laboratory setting.
Must be able to work independently and as part of a larger team.
Experience with Aerotech stage controllers and g-code would be preferred.
Familiarity with MS Office software.
Familiarity with Design of Experiments.
Be flexible to respond to new requests and learn new skills.
Setting up lasers in the lab generally involves some moderate lifting.

For consideration, please submit the following including a resume and cover letter with salary history or requirements.

Career Name
Name*
名姓
Email*
Phone*
Cover Letter*
Resume*

Optics Manufacturing Technician

Job Functions:

Under direct supervision, assembles products and their components and subsystems, including those that are extremely fragile.
Uses various tools and equipment to assemble and test products and their components and subsystems.
Maintains inventory of products and their components and subsystems.
Makes minor adjustments to the assembly workstation and offers feedback on major adjustments.
Recognizes anomalous results and notifies others.
Documents work according to existing documentation schemes.
Maintains inventory of supplies.
Maintains and periodically calibrates equipment.
May assume responsibility for oversight of a production workstation, including supplies, maintenance and housekeeping.

Qualifications:

Required:

Good manual dexterity.
Quality conscious, attention to detail.
Competency in MS Office
Able to work 20 – 40 hours per week between 7:00 am – 5:00 pm.

Preferred:

Associate’s degree in engineering or related field, plus one to two years experience in fabrication of optical, optical fiber, mechanical, or fragile parts; or high school diploma plus three to five years of experience.
Work experience in epoxy use in manufacturing and general chemical use.
Optical measurement techniques.
Experience working with laser and optical sources.
Experience working in an EPA (electrostatic protected area) with ESD’s (electrostatic sensitive devices).
Experience working in an ISO standard workplace.

For consideration, please submit the following including a resume and cover letter with salary history or requirements.

Career Name
Name*
名姓
Email*
Phone*
Cover Letter*
Resume*

Laser Development Engineer

Job Functions:

Designs and develops ultrashort pulse lasers, amplifiers and related products
Prototyping new products
Leads in technical design reviews with documents, test and BOM
Develops production processes of the prototypes and transfers to production

Qualifications:

PhD degree in engineering or science discipline
Expert knowledge in ultrashort pulse lasers
5+ year industrial R&D experience
Knowledge in optical software, basic mechanical CAD and electronics
Proficient knowledge and experiences in test and measurement equipment related with ultrashort pulse characterizations
Excellent verbal and written communication skill
US citizen or permanent residency in US

For consideration, please submit the following including a resume and cover letter with salary history or requirements.

Career Name
Name*
名姓
Email*
Phone*
Cover Letter*
Resume*

Precision Mechanical Engineer

Job Functions:

Design and develop precision mechanical parts for optics for laser products
Responsible for mechanical component design
Responsible for mechanical package design
Responsible for controller package design to drive the laser
Leads mechanical design review activities
Leads transferring of mechanical design of parts and products to manufacturing
Responsible for engineering specs for all mechanical parts used in product
Develops production assembly processes and jigs

Qualifications:

Requires precision mechanical design and materials knowledge
B.Sc or MS degree in engineering or science discipline
Proven track record in precision mechanics component and package design
Knowledge in mechanical process engineering
Proficient experiences in Autodesk Inventor
Proficient experiences in FEA analysis
Proficient experiences in mechanical tolerance analysis
Experienced knowledge in optics is a plus
Hands-on capability in mechanical component test
5+ years of industrial precision mechanics design engineering experience
Excellent verbal and written communication skills
Citizen or permanent resident of the United States

For consideration, please submit the following including a resume and cover letter with salary history or requirements.

Career Name
Name*
名姓
Email*
Phone*
Cover Letter*
Resume*

Nanobiotechnology Product Development Engineer

CAD Drafter

Electronics Engineer

Electronics Technician

Laser Applications Research Technician

Laser Application Reseacher

Laser Development Engineer

Optics Manufacturing Technician

Precision Mechanical Engineer

Product Engineer

Laser Research Scientist

Job Functions:

Qualifications:

Job Functions:

Qualifications:

Job Functions:

Qualifications:

Job Functions:

Qualifications:

Job Functions:

Qualifications:

Job Functions:

Qualifications:

Job Functions:

Qualifications:

Job Functions:

Qualifications

Job Functions:

Qualifications:

Job Functions:

Qualifications:

Required:

Preferred:

Job Functions:

Qualifications:

Job Functions:

Qualifications: